TYPHOON Quick Starter Guide
Installation
Click within the box to start the video
Operation
Click Within the box to start the video
Upon contact with the surface of the tubular the wiper blades mechanically remove drilling fluids from the outside diameter.
Wiper blade position is adjustable to cover the full range of tubular outside diameters used in drilling and completing wells.
Selection of various ranges of tubular sizes is achieved through changing the end position of the slew ring.
Actuation of the slew ring in the opposite direction retracts the wiper blades to allow full opening of the TYPHOON v.3 and no restrictions for running tools into the hole.
The TYPHOON v.3 is also designed with 8 HP washdown nozzles equally spaced around the Tool to provide full coverage. HP washdown can either be configured for water, or for base oil depending on the mud system in use.
Summary of the cleaning method vs Tubular in hole is shown below in Table below
| Table 1 Tubular in Hole | Cleaning Method |
| Drill Pipe | Rubber Blades |
| Heavy Weight Drill Pipe | Rubber Blades |
| Drill Collars | Rubber Blades |
| Tubing | Rubber Blades |
| Casing | Rubber Blades |
| Bit/MWD/LWD/Stabilisers | HP Wash Down Nozzles |
IMPORTANT – To achieve optimum lifetime of rubbers, it is important to achieve minimum contact pressure on pipe for acceptable cleanliness, follow procedure outlined in the animation
