TYPHOON v.3
TYPHOON v.3
Automated pipe handling systems have allowed many conventional rig floor tasks to become obsolete. Yet a fundamental operation – wiping the pipe when POOH, still relies on technology from the days of wooden derricks. With 100% Red Zone compliance a non-negotiable in today’s Drilling industry, there existed a gap in technology that RIGTOOLS identified and have solved with the TYPHOON v3.
Facts
The TYPHOON Wiper is tailor-made to fit on top of the diverter or bell nipple. It connects to the rig’s HP water system or a special HP unit fit for purpose. In addition LP air is connected for actuation of the rubber wiping blades.
Actuation of water/wiper blades can be done locally on the drill floor or remotely from Driller’s Cabin.
- Heavy duty stainless steel.
- HP water nozzles for cleaning BHA components.
- Require: HP water at 150-200 bar, 20-24 liter/min.
- 8 adjustable rubber blades for wiping DP,HWDP,DCs etc.
- Require: LP air at 6-7 bar, 1000lpm for operation of slew motor.
- Machinery ATEX certified for zone 1.
- ID minimum – Greater than 18 ¾”
- In compliance with ”Dropped Object Prevention Handbook”.
Advantages
- Easy to install on top of diverter or bell nipple.
- Improves safety on drill floor.
- No risk of dropped objects.
- No debris on drill floor or windows from using manual HP cleaning. All debris will be kept below rotary. Clean and tidy.
- BHA and DP string will be pulled faster out of hole, no stops for manual cleaning.
- Clean BHA when racking back or laying down on deck.
Benefits
- TYPHOON Wiper eliminates personnel performing manual cleaning in Red Zone when BHA and DP is pulled through rotary.
- Cost savings on purchase of wiper rubbers.
- Rig time savings on installation/removal of wiper rubbers on every trip.
- Rig time savings when pulling BHA through RT.
No mud on slips. - Eliminates handling of master bushings prior to POOH if installing wiper rubber below the table.
- Eliminates hazards of mud on rotary table if wiper rubber installed above table.
- Blades adjustable through full range from 18 ¾” to 2 7/8” – Ability to wipe casing, standalone screens, completion jewellery.
- No exposure to the danger of dropped objects or working close to remote operated machines on drill floor – 100% Red zone compliance
- The tool only uses very limited water volume when HP cleaning the BHA
We can provide a suitable HP Cleaner for your MONSOON Shaker Screen Washer / COBRA Wash & Dope Tool / TYPHOON Wiper / BHA Wash Tool / SPEEDY Gonzales Pin Cleaner.
High Pressure Cleaners
High Pressure Cleaners
RIGTOOLS provide a range of High Pressure Cleaners. The machines are designed by RIGTOOLS using the best and most reliable components available on today’s market.
Facts
The units are tailor-made to match the end users specific requirements.
Capacity is typically from 100 Bar to 500 Bar. Non Ex as well as Ex rated. Non heated, heated or winterized. Mobile units or stationary, perhaps installed in an offshore cage. The units can also be designed to supply the distribution network or ring lines on rigs or ships.
The High Pressure Cleaners comply with all current regulations and requirements in the oilfield and for ships.
Advantages
RIGTOOLS have developed High Pressure Cleaners specially designed to deliver required water flow and pressure to RIGTOOLS BHA Wash Tool, TYPHOON Wiper, COBRA DP Pipe Wash & Dope Tool and the MONSOON Shaker Screen Washer.
Benefits
Highly reliable quality units will prevent downtime.
Service and maintenance is reduced to a minimum.
Using tailor-made HP Cleaners units always ensures the ideal capacity and results.
Mobile HP Cleaners
RIGTOOLS mobile units can be supplied be supplied both as EX and non EX rated.
In connection with the small units we can supply a RIGTOOLS Hot Box which produces hot water to feed directly into the small moblie unit. This is a very flexible and cost effective system which can provide cold or hot water for use in Ex and none Ex zones.
TYPHOON v.2
TYPHOON v.2
The high level of safety at modern drilling operations require special attention to equipment. Most drilling rigs have fully automated derrick and pipe handling systems. In certain regions the legislation prohibits personnel to work on the drill floor while the automatic pipe handling machines are in use. But still we experience personnel using HP cleaners when BHA is pulled through rotary and rubber wipers to clean DP string.
Facts
The TYPHOON v.2 is tailor-made to fit on top of the diverter or bell nipple.
It connects to the rig’s HP water system or a special HP unit fit for purpose. In addition HP air is connected. Actuation of water/air can be done locally on the drill floor or remotely from driller’s cabin.
TYPHOON v.2 is welded in heavy stainless steel and in compliance with “Dropped Object Prevention Handbook”.
CE certification.
Welding certificate.
Advantages
Easy to install on top of diverter or bell nipple.
Improves safety on drill floor.
No risk of dropped objects.
No debris on drill floor or windows from using manual HP cleaning. All debris will be kept below rotary. Clean and tidy.
BHA and DP string will be pulled faster out of hole, no stops for manual cleaning.
Clean BHA when racking back or laying down on deck.
Benefits
TYPHOON v.2 eliminates personnel performing manual cleaning in Red Zone when BHA and DP is pulled through rotary.
No exposure to the danger of dropped objects or working close to remote operated machines on drill floor.
The tool only uses very limited water volume when HP cleaning the BHA.
Less time spent on housekeeping after tripping, fast moving to next operation, less flat spots on operational trends.
Reviews
We can provide a suitable HP Cleaner for your MONSOON Shaker Screen Washer / COBRA Wash & Dope Tool / TYPHOON Wiper / BHA Wash Tool / SPEEDY Gonzales Pin Cleaner.
