High Pressure Cleaners

High Pressure Cleaners

RIGTOOLS provide a range of High Pressure Cleaners. The machines are designed by RIGTOOLS using the best and most reliable components available on today’s market.


The units are tailor-made to match the end users specific requirements.

Capacity is typically from 100 Bar to 500 Bar. Non Ex as well as Ex rated. Non heated, heated or winterized. Mobile units or stationary, perhaps installed in an offshore cage. The units can also be designed to supply the distribution network or ring lines on rigs or ships.

The High Pressure Cleaners comply with all current regulations and requirements in the oilfield and for ships.


RIGTOOLS have developed High Pressure Cleaners specially designed to deliver required water flow and pressure to RIGTOOLS BHA Wash Tool, TYPHOON Wiper, COBRA DP Pipe Wash & Dope Tool and the MONSOON Shaker Screen Washer.


Highly reliable quality units will prevent downtime.

Service and maintenance is reduced to a minimum.

Using tailor-made HP Cleaners units always ensures the ideal capacity and results.

Mobile HP Cleaners

RIGTOOLS mobile units can be supplied be supplied both as EX and non EX rated.

In connection with the small units we can supply a RIGTOOLS Hot Box which produces hot water to feed directly into the small moblie unit. This is a very flexible and cost effective system which can provide cold or hot water for use in Ex and none Ex zones.

Hi-hat Doper

HI-HAT Doper

HI-HAT Doper is a lightweight raised frame for buckets. The integrated lid keeps water and debris out of the expensive dope.


Frame and lid made of galvanized steel.

1 meter high and weighing 10 kg.

Two brackets on the sides for holding dope brushes.


The piedestal with brush brackets and foot operated lid improves ergonomics. Fast and efficient to use.

Furthermore the lid will keep the dope clean.


Personnel will not get exposed to dope.

Keeping the dope clean will extend the lifetime and reduce the amount of discarded half full buckets due to contaminated dope.

No contaminated dope will be applied on threads.

BHA Wash Tool

BHA Wash Tool

The high level of safety in today’s drilling operations around the world require special attention to
equipment. Most drilling rigs have fully automated derrick and pipe handling systems. In certain
regions the legislation prohibits personnel to work on the drill floor while the automatic pipe
handling machines are in use. But still we experience personnel using HP cleaners when BHA is
pulled through rotary.


The tool is tailor-made to fit on top of the diverter or bell nipple. It connects to the rig’s HP system or a special HP unit fit for purpose. Actuation of HP water can be done locally on the drill floor or remotely from driller’s cabin.

The BHA Wash Tool can be installed either with three legged sling or with the special made Running Tool.

BHA Wash Tool is welded in heavy stainless steel and in compliance with “Dropped Object Prevention Handbook”.
CE certification.
Welding certificate.


Easy to install on top of diverter or bell nipple.
Improves safety on drill floor.
No risk of dropped objects.
No debris on drill floor or windows from using manual HP cleaning. All debris will be kept below rotary. Clean and tidy.
BHA will be pulled faster out of hole, no stops for manual HP cleaning.
Clean BHA when racking back or laying down on deck.


BHA Wash Tool eliminates personnel using manual HP cleaners in Red Zone when BHA etc. is pulled through rotary.

No exposure to the danger of dropped objects or working close to remote operated machines on drill floor.

The tool only uses very limited water volume when HP cleaning the BHA.

Less time spent on housekeeping after tripping, fast moving to next operation, less flat spots on operational trends.


We can provide a suitable HP Cleaner for your MONSOON Shaker Screen Washer / COBRA Wash & Dope Tool / TYPHOON Wiper / BHA Wash Tool / SPEEDY Gonzales Pin Cleaner.